CISCO CCNP Online - Ezxprt - CISCO Networking Academy

Get Early Bird Discount!

Watch Demo Class

Check Course Fee

Course Content

Student Reviews

Why This Bundle

Target Job Roles

Register Now

CCNP Batch 12 Road Map

📆 Duration: 12 Weeks
🧑‍🏫 Sessions: 24 (90 Minutes Each)
📍 Schedule: Saturdays & Sundays at 7:30 PM (Pakistan Time)
💻 Mode: Live Online with Practical Labs

Why Choose This Professional Training Course?

This is not just exam preparation — it’s a field-oriented CCNP training bundle that prepares you for both certification success and practical enterprise networking challenges.
- Covers core routing, switching, security, and automation topics
- Learn with live demonstrations on:
  - Cisco Packet Tracer
  - EVE-NG
  - Physical routers, switches, and wireless access points
- Delivered by Trainer Shafqaat Mehmood, a seasoned IT professional with 20+ years of hands-on experience
- Every topic explained with step-by-step labs for real-world implementation

Key topics Highlights

Dynamic Routing Protocols: OSPF, EIGRP, BGP
Switching Mastery: VLANs, Trunking, STP, EtherChannel
IP Services: ACLs, NAT, DHCP, NTP, Syslog
Enterprise Redundancy: HSRP, Route Redistribution
Advanced Technologies: VPNs, QoS, SD-WAN
Network Automation Preview: DNA Center, APIs
IPv4/IPv6 Dual-Stack Configurations
Mock tests, live troubleshooting labs, and guidance for ENCOR & ENARSI exams

CCNP (ENCOR + ENARSI Combined) Training Program

Duration: 12 Weeks | Total Sessions: 24 | Session Time: 90 Minutes

Option 1: Days: Saturdays & Sundays | Time: 7:30 PM Pakistan Time

Option 2: Days: Saturdays & Sundays | Time: 10:00 AM Pakistan Time

3 Training Tools: Cisco Packet Tracer, EVE-NG, Physical Devices

Part 1: Enterprise Core – Switching, VLANs, Routing (Sessions 1–8)

Week 1 (Sessions 1 & 2)

Session 1: CCNP Program Orientation & Enterprise Architecture
- Course flow and expectations
- Cisco’s enterprise modular architecture (Access, Distribution, Core)
- Campus design, WAN, SD-WAN basics
- Types of controllers, network topologies
Session 2: Switching Review & VLAN Basics
- Layer 2 vs Layer 3 switches
- VLAN types, configuration, and benefits
- Hands-on: VLAN creation, assigning switch ports (Packet Tracer demo)

Week 2 (Sessions 3 & 4)

Session 3: Trunking and DTP
- 802.1Q tagging, native VLAN
- Dynamic Trunking Protocol (DTP)
- Hands-on: Trunk links between switches, VLAN testing
Session 4: Spanning Tree Protocol (STP)
- STP concepts: Root bridge, port states
- Rapid STP (RSTP), PVST+
- Hands-on: STP topology design and failure recovery test (EVE-NG)

Week 3 (Sessions 5 & 6)

Session 5: EtherChannel (Static & LACP)
- Port aggregation concepts
- Configuration using PAgP and LACP
- Hands-on: Create and verify EtherChannel
Session 6: Inter-VLAN Routing & SVIs
- Layer 3 switch basics
- Switch Virtual Interfaces (SVIs) and router-on-a-stick
- Hands-on: Configure Inter-VLAN routing (Packet Tracer or EVE-NG)

Week 4 (Sessions 7 & 8)

Session 7: IPv4 Routing Concepts
- Static vs Dynamic routing
- Administrative distance, routing table lookup
- Hands-on: Static routing between routers
Session 8: IPv6 Fundamentals & Routing
- IPv6 addressing and subnetting
- IPv6 static routing and dual-stack
- Hands-on: IPv6 lab in EVE-NG

Learning Outcomes (Part 1)

Understand modern enterprise network design
Master VLANs, Trunking, STP, and EtherChannel
Perform inter-VLAN routing and static routing
Gain confidence with IPv4/IPv6 routing in lab environments
Develop command-line configuration skills using real and virtual labs

Part 2: Dynamic Routing, Redundancy, NAT & ACLs (Sessions 9–16)

Week 5 (Sessions 9 & 10)

Session 9: EIGRP Overview & Basic Configuration
- EIGRP features: DUAL, metrics, AD
- Configuration for IPv4
- Hands-on: EIGRP lab in Packet Tracer
Session 10: Advanced EIGRP & Troubleshooting
- Passive interfaces, manual summarization
- EIGRP for IPv6
- Hands-on: Dual-stack EIGRP lab (EVE-NG)

Week 6 (Sessions 11 & 12)

Session 11: OSPF Single Area Configuration
- OSPF concepts: LSA types, neighbor adjacency
- OSPFv2 for IPv4
- Hands-on: OSPF lab with DR/BDR election
Session 12: Multi-Area OSPF + IPv6
- OSPF multi-area design
- OSPFv3 for IPv6
- Hands-on: OSPFv3 dual-stack lab in EVE-NG

Week 7 (Sessions 13 & 14)

Session 13: HSRP and FHRP Concepts
- HSRP, VRRP, GLBP overview
- Configuration of HSRP for gateway redundancy
- Hands-on: HSRP failover simulation lab
Session 14: NTP, Syslog & SNMP
- Time synchronization using NTP
- Logging and SNMP basics for monitoring
- Hands-on: NTP and Syslog configuration demo

Week 8 (Sessions 15 & 16)

Session 15: NAT (Static, Dynamic, PAT)
- Inside/outside NAT concepts
- Static and dynamic NAT + Port Address Translation
- Hands-on: Configure NAT on a Cisco router
Session 16: ACLs (Standard & Extended)
- ACL types and use cases
- Applying ACLs on interfaces and vty lines
- Hands-on: Create and test ACLs for access control

Learning Outcomes (Part 2)

Configure and troubleshoot EIGRP and OSPF for IPv4 and IPv6
Design and test redundant networks using HSRP
Use NAT and ACLs to manage traffic flow and enhance security
Implement NTP and monitoring services in enterprise networks
Improve real-world readiness with multi-protocol routing labs

Part 3: Advance Routing, BGP, VPNs, SD-WAN & Exam Prep (Sessions 17–24)

Week 9 (Sessions 17 & 18)

Session 17: Route Redistribution Concepts
- Why redistribution is needed
- One-way vs bidirectional redistribution
- Hands-on: Redistribute EIGRP <-> OSPF in EVE-NG
Session 18: Routing Troubleshooting Techniques
- Debug commands, ping, traceroute
- Troubleshooting ACLs, NAT, and routing loops
- Hands-on: Simulated troubleshooting scenarios

Week 10 (Sessions 19 & 20)

Session 19: BGP Fundamentals
- IBGP vs EBGP, BGP attributes
- BGP path selection and configuration basics
- Hands-on: Basic BGP setup in EVE-NG
Session 20: BGP Advanced Concepts
- Route filtering using prefix lists
- BGP neighbor relationships and route maps

Week 11 (Sessions 21 & 22)

Session 21: VPN Technologies
- Site-to-Site, Remote Access VPN
- IPsec and GRE overview
- Hands-on: Configure GRE tunnel in EVE-NG
Session 22: QoS (Quality of Service)
- QoS principles: delay, jitter, packet loss
- Traffic marking, queuing, and shaping
- Hands-on: QoS simulation for voice/data traffic

Week 12 (Sessions 23 & 24)

Session 23: SD-WAN and Automation Intro
- SD-WAN architecture and use cases
- Intro to Cisco DNA Center and APIs
- Brief on Ansible, Python, RESTCONF
Session 24: Final Review & Certification Planning
- Review of all modules
- ENCOR and ENARSI exam tips
- Career roadmap: what’s next after CCNP
- Q&A and mock test guidance

Learning Outcomes (Part 3)

Understand and configure route redistribution across protocols
Deploy and troubleshoot BGP, QoS, and VPNs
Get familiar with SD-WAN, network programmability, and automation
Build readiness for CCNP ENCOR and ENARSI exams
Plan your post-CCNP career: specialization, certification, or job search

Post-Training Plan

Certification Pathway

After completing this CCNP training, you’re well-prepared to attempt the following globally recognized certifications:

✅ 1. CCNP ENCOR (350-401) – Enterprise Core Exam

Covers: Routing, switching, virtualization, infrastructure, security, automation
Benefit: This is the core exam required for all enterprise-level certifications by Cisco.

✅ 2. CCNP ENARSI (300-410) – Enterprise Advanced Routing and Services

Covers: Layer 3 technologies, VPNs, route redistribution, infrastructure security & services
Benefit: This is a concentration exam that, when combined with ENCOR, awards you the CCNP Enterprise Certification.

📍 After passing both:

You earn the CCNP Enterprise title.
You become eligible to specialize further (SD-WAN, Wireless, Automation).

Job Roles You Can Target

With this hands-on training and CCNP-level knowledge, you can confidently apply for:

🖥️ Network Engineer
🌐 Enterprise Infrastructure Admin
🔐 Network Security Analyst (Entry-level)
☁️ NOC / SOC Technician
🧠 IT Support Engineer (L2/L3)
🛠️ System & Network Technician

Suggested Career Roadmap (Post-Training)

Phase	Action	Objective
Immediately	Revise key labs, take mock tests	Strengthen practical + theoretical grip
Within 1–2 Months	Attempt ENCOR exam (350-401)	Start building your Cisco certification profile
Within 3–4 Months	Attempt ENARSI exam (300-410)	Complete your CCNP Enterprise certification
Alongside / After Certification	Apply for jobs in networking, support, NOC	Begin your professional journey
6–12 Months Later	Explore advanced paths: Cisco Security, SD-WAN, DevNet, Fortinet, Azure	Broaden your skill set and salary potential

Watch Demo Class

Student Reviews

Fee Details

₨ 60000($200 USD)

Live Training on Microsoft Teams
Own Designer Practical Lab Manual
Virtual Lab for Hands On
Router & Swich Access for Practice
24/7 Assistance for Good Learning
Training Completion Certificate

₨ 30000

Pre Recorded Lectures
Own Designer Practical Lab Manual
Virtual Lab for Hands On
24/7 Assistance for Good Learning
Q/A Session Live with Trainer
Training Completion Certificate

Live Training on Microsoft Teams
Own Designer Practical Lab Manual
Virtual Lab for Hands On
Router & Swich Access for Practice
24/7 Assistance for Good Learning
CV Writing
Interview Preparation

Register Now

CCNP Batch 12 Road Map

Why Choose This Professional Training Course?

Key topics Highlights

CCNP (ENCOR + ENARSI Combined) Training Program

Part 1: Enterprise Core – Switching, VLANs, Routing (Sessions 1–8)

Part 2: Dynamic Routing, Redundancy, NAT & ACLs (Sessions 9–16)

Part 3: Advance Routing, BGP, VPNs, SD-WAN & Exam Prep (Sessions 17–24)

Post-Training Plan

Job Roles You Can Target

Suggested Career Roadmap (Post-Training)

Watch Demo Class

Student Reviews

Fee Details

Online Live Class

Recorded Through LMS

1 to 1 (Customized)